The slide frame, side wear and stop pads are located on section three of the slide frame
assembly and on each side of the vehicle.
Remove (Side Stop Pad)
On number three section of the slide frame locate and identify the side stop plug.
Remove the four screws (11) and lock washers (12). Discard the lock washers.
Extract the retaining plate (9) complete with the side stop plug (8).
Check the screws and washers for damage.
Measure the thickness of the side stop plug (8). If the measurement is less than 1 5/8 inch
(42mm), replace the side stop plug (8) by removing the stop plug securing screws (10).