Remove - TM-5-5420-279-230498

TM 5-5420-279-23

Remove

(1)

Remove the screws (3), washers (4) and nyloc nuts (5). Discard the nyloc nuts (5).

(2)

Remove the guard plate (2).

(3)

Place a suitable container under the micro-bore pipes to catch any hydraulic fluid.

(4)

Note the position of and remove the micro-bore pipes from the telescopic tube (1).

(5)

Remove the upper screws (8), washers (9), locking plate (7) and pin (10).

(6)

Remove the lower screws (12), washers (13) locking plate (11) and pin (14).

(7)

Remove the telescopic tube (1).

(8)

Check the micro-bore pipes for damage.

(9)

Check all components for wear and damage.

(10)

Replace components as necessary.

5-242