Install - TM-5-5420-279-230388

TM 5-5420-279-23

Install

(1)

Refer to general unit maintenance procedure 5-158 before assembling the rear pinch roller.

(2)

Fit the spacer sleeve (12) to the shaft (16).

(3)

Fit the shaft to the roller (10).

(4)

Fit the roller bearing (6) and washer (5) to the shaft (16).

(5)

Fit the retaining ring (11) to the shaft (16).

(6)

Fit a new seal (8) to the shaft (16).

(7)

Fit the spacer (15) and plain round nut (2) to the shaft (16).

(8)

Fit the grease fitting (9) to the Roller (10).

(9)

Apply thread locking compound to bolts (18).

(10)

Fit the lever remote controls (13 and 14) to the roller assembly and secure in place with

keep plates (17) and bolts (18).

Service

(1)

Grease the bearings through the grease fitting (9).

Follow on tasks

(1)

Ensure that the roller rotates freely on the bearings.

(2)

Fit the Rear pinch roller assembly to the launch frame. See unit maintenance procedure

5-029.

(3)

Check the operation of the rear pinch roller.

5-132