The operating arm (9) on the A-Frame rotate limit switch can be adjusted by releasing the
adjuster screw (not shown) in the same way the A-Frame parked limit switch is adjusted.
Release the adjuster screw (not shown) on the A-Frame rotate limit switch (2).
Set the operating arm (9) to an angle of 45 degrees from the rotate cylinder mounting and
tighten the adjuster screw.
A-Frame Rotate Limit Switch
Follow on task
DANGER FROM MOVING PARTS. OPERATION OF EQUIPMENT POWERED BY
HYDRAULIC PRESSURE IS HAZARDOUS. KEEP CLEAR OF MOVING PARTS.
Check that the A-Frame rotates, folds and unfolds in accordance with the operator's
manual TM 5-5420-279-10.