5 - 023 A-FRAME - LIMIT SWITCHES
This task covers:
Tool Kit, General Mechanic's, Automotive (GMTK)
Limit switch (As required)
Lock washers (Qty 4 each)
Vehicle switched off and battery shutoff switch in the off position
Unscrew the electrical plug (1) attached to the limit switch (2).
Remove the four mounting bolts (3) and lock washers (4). Discard the lock washers (4).
Locate limit switch (2) on the A-Frame.
Secure in place using four lock washers (4) and four mounting bolts (3).
Connect the electrical plug (1) to the limit switch (2).
Switch the battery shutoff switch to the on position.
With the A-Frame fully deployed, loosen the block screws (6) and ease the block (5)
towards the position switch plunger (7).
When the A-Frame Fold (deployed) light, in the interface cabinet, illuminates tighten the
block screws (6).