Quantcast Install - TM-5-5420-279-230364

 

Click here to make tpub.com your Home Page

Page Title: Install
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home


   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 

Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
Back
Remove - TM-5-5420-279-230363
Up
TM-5-5420-279-23 Dry Support Bridge (DSB) (NSN
Next
Follow on tasks - TM-5-5420-279-230365
TM 5-5420-279-23
(22)
Remove the pin (45).
(23)
Remove the roller assembly (30 and 34 trough 43) from the A-Frame assembly.
(24)
Remove the pin (27).
(25)
Remove the lever arm (28).
(26)
Remove the spring pin (29).
(27)
Hold the nut (34) with a wrench and remove the shouldered shaft (38) with the aid of the
BSE peg wrench.
(28)
Remove the nut (34) and lock washer (35). Discard the lock washer (35).
(29)
Remove the roller (37), bushing (36) and shouldered shaft (38).
(30)
Remove the snap ring (39), washer (40), spacer (41), roller arm (42) and bushing (43) from
the pivot shaft (30).
(31)
If required remove bushing (44) from pivot shaft (30).
(32)
Check the condition of the roller assembly components (27 through 45).
(33)
Replace components as required.
b.
Install
(1)
Refer to the roller assembly illustration.
(2)
If removed fit the bushing (44) to the pivot shaft (30).
(3)
Fit the spring pin (29) to the pivot shaft (30).
(4)
Fit the bushing (43), roller arm (42), spacer (41), washer (40) and snap ring (39), to the
pivot shaft (30).
(5)
Fit the bushing (36) to the roller (37) and place on to the shouldered shaft (38).
(6)
Fit the shouldered shaft (38) and roller (37) to the roller arm (42), with a new lock washer
(35) and nut (34).
(7)
Hold the shouldered shaft (38) with the aid of the BSE Peg wrench and tighten the nut (34)
with a wrench.
(8)
Fit the lever arm (28) to the A-Frame assembly with the pin (27).
(9)
Fit the roller assembly (30 and 34 through 44) to the A-Frame assembly with the pin (45).
(10)
Fit the keep plate (33) to the A-Frame support bracket with the lock washers (31) and bolts
(32).
(11)
Refer to the handle assembly illustration.
(12)
If removed fit the thread insert (9) to the stop track (2).
(13)
Apply thread locking compound to the screws (8) and fit the slide block (4) to the stop track
(2).
(14)
Apply thread locking compound to the screws (3 and 5) and fit the wear pad (10) to the
stop track (2) in the position noted during removal.
(15)
Fit the stop track (2) complete with items (3, 4, 5 and 10) to the A-Frame stabilizer leg.
5-108

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc.