 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-5420-279-23
a.
Remove
(1)
Remove the two nyloc nuts (3) securing the u-bolt (2). Discard the nyloc nuts (3).
(2)
Support the weight of the stabilizer foot (1) and remove the u-bolt (2).
(3)
Lift-off the stabilizer foot (1).
(4)
Remove the six screws (5) and remove foot pivot plate (4).
(5)
Check the stabilizer foot (1) and u-bolt (2) for damage and corrosion.
(6)
Check the foot pivot plate (4) in the A-Frame stabilizer leg for damage and corrosion.
(7)
Replace components as required.
b.
Repair
(1)
Refer to Appendix K for welding procedures as required.
c.
Install
(1)
Place foot pivot plate (4) in position on stabilizer leg. Using thread locking compound on
the screw threads (5), secure foot pivot plate (4).
(2)
Supporting the weight, refit the stabilizer foot (1) and secure with u-bolt (2) and new nyloc
nuts (3).
5-105
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals