BRIDGE MODULE - RAMP MODULE LIFTING PIN

TM 5-5420-279-23

5 - 010 BRIDGE MODULE - RAMP MODULE LIFTING PIN

This task covers:

a. Remove

b. Install

INITIAL SETUP:

Tools Required

Tool Kit, General Mechanic's, Automotive (GMTK)

Materials Required

Thread locking compound, loctite 243

Lock washers (Qty 4)

Equipment Conditions

Ramp module open and placed on a suitable working surface

NOTE

The lifting blocks are welded to the underside of the ramp module during manufacture.

Remove

(1)

Remove the screws (8) and lock washers (7) securing the guide bar (6) to the lifting block

(1).

(2)

Remove the guide bar (6).

(3)

Remove the locating cap (4) securing screws (5).

(4)

Remove the locating caps (4).

(5)

Remove the guide ring (3) and lifting pin (2).

(6)

Check all threaded components for wear and damage.

(7)

Check the guide ring (3) and lifting pin (2) for wear and damage.

(8)

Check the locating caps (4) for wear and damage.

(9)

Replace components as necessary.

Install

(1)

Fit the guide ring (3) to the lifting pin (2).

(2)

Fit the lifting pin (2) to the lifting blocks (1).

(3)

Apply thread locking compound to the locating cap screws (5).

(4)

Fit the locating caps (4) to the lifting blocks (1) and secure in place with the screws (5).

Change 1 5-77