Figure 2-3. Simulator-Test Set SM-349/ARC-54, sliding-connector bracket extended.

TM 11-6625-601-12

Perform the procedures listed in b

2-7. Testing Receiver-Transmitter, Radio

above.

RT-348/ARC-54

(2) R e m o v e the SM-349/ARC-54 from

the TS-1967/ARC-54 (fig. 1-1).

The tests listed in paragraphs 2-8 through

Extend the sliding connector brack-

2-19 are used to check the performance of the

et at the rear of the SM-349/ARC-54,

RT-348/ARC-54. The tests are complete indi-

and secure it in place by using the two

vidual `tests and may be performed in any

locking pins (fig. 23).

sequence. The preliminary starting procedure

(4) R e m o v e the RT-348/ARC-54 from

and equipment interconnection figure refer-

M o u n t i n g MT-1535/ARC-54 in the

ence is given at the start of each test. Any

aircraft.

additional equipment interconnection is given

(5) Install the SM-349/ARC-54 into the

in the procedures.

MT-1535/ARC-54 in place of the RT-

Figure 2-3. Simulator-Test Set SM-349/ARC-54, sliding-connector bracket extended.

2-9