Reporting Message Receipt (Spares). - TB-1-1520-237-20-2140005

TB 1152023720214

UH6099ASAM09, (TB 1152023720214) date of inspection, aircraft serial number, aircraft hours,

and results of the inspection. Inspection and reports will be completed no later than 3 September 1999. Nega-

tive reports are required.

Reporting Message Receipt (Spares).

(1) Materiel In Wholesale Depot Storage. Report receipt of this TB by email or datafax to the

wholesale materiel (spares) point of contact listed in paragraph 16c within 3 working days from the date of

this message. Provide local POC.

(2) Materiel in Retail Storage. Report receipt of this message by email or datafax to the logistical

POC listed in paragraph 16 b within 7 days from the date of this message. Provide local POC.

d. Task/Inspection Reporting Suspense Date (Spares).

(1) Materiel In Wholesale Depot Storage. Upon receipt of this TB a depot inspection of the whole-

sale stock will either be in process or already completed. This depot inspection team was instructed to inspect

paragraph 7 part IAW paragraph 8 and in addition to the inspection requirements to the following:

(a) Provide serial numbers and the manufacturer's cage code of discrepant stock to the

wholesale point of contact in paragraph 16c.

(b) Reclassify discrepant stock to condition code "H". All other stock is to remain in its original

condition code.

UH6099ASAM09 (TB 11520237214)"

(2) Materiel In Retail Storage. Report compliance with this TB to the logistical POC in paragraph

16b within 14 days of the date of this TB. Report the quantity inspected by condition code and the resulting

condition code. Report by email or datafax and provide local point of contact.

e. Special Report of Discrepant Item. Within 24 hours of discovery of a discrepant item, submit a report

directly to the AMCOM Utility Helicopters System Engineering, AMSAMAREICU, datafax (256)

3134923, DSN 8974923 or alternate datafax (256) 9556590, DSN 6456590. A form to record this data

is available on the safety page of the UH PMO website http://www.uhpo.redstone.army.mil. If unable to ac-

cess the PMO web page, contact the technical or logistical POC in paragraph 16a/b to receive a copy of the

report form via email or fax,. The report shall contain the following information. Subject: "Report of Discrep-

ant Main Rotor Expandable Pin, ASAM UH609909", (TB 1152023720214).

(1) Location of discrepant pin position (lead or lag).

(2) Part number and serial number of discrepant pin and location(s) of discrepant segment(s),

time since new and time since installed in associated spindle and cuff.

(3) Part number, serial number, and component total time of associated main rotor spindle.

(4) Part number, seriel number, and component total time of associated main rotor blade.

(5) Part number, serial number, and component total time of associated main rotor blade cuff.

(6) Contact information (POC, commercial and DSN telephone numbers, unit, location, fax num-

ber, email address).

The following forms are applicable and are to be completed IAW DA Pam 738751, 15 March 1999.

NOTE

ULLSA Users will use the applicable "E" Forms.

(1) DA Form 240851, Equipment Modification Record (Blade Expandable Pin).

(2) DA Form 240813, Aircraft Status Information Record.